Duke TSC-6/18 - Revert to Factory Default Recipes; Usb Maintenance and Operation Screens Load;Update

Owner's Manual for DUKE TSC Proofer Oven
with Touch Screen Controls
18
REVERT TO FACTORY DEFAULT RECIPES
1. Press and hold the OVEN button for Approx 5
seconds or until the Special Functions Screen
opens.
2. Press CLEAR, 1 7 9 2 and ENTER.
3. Press OK to accept Default Recipes.
4. Press EXIT to return to main menu page.
SPECIAL FUNCTIONS – PIN Number Entry
CLEAR
ENTER
PIN CODE
1 2
3
4 5
6
7 8
9
0
EXIT
Figure 22: Main Menu Screen With Factory
Default Recipes Loaded
Figure 20: Special Functions Screen
Figure 21: Default Recipe Enable Screen
USB MAINTENANCE AND OPERATIONS
SCREENS LOAD/UPDATE
1. Turn the main power switch o󰀨 then back on.
Unit will beep three times and display the
start screen.
Figure 23: Start Screen
SPECIAL FUNCTIONS – PIN Number Entry
CLEAR
ENTER
PIN CODE
EXIT
****
OK
DEFAULT RECIPES
Now Enabled
OVEN
PROOFER
BREAD
COOKIES
BREAD 2
BREAD 3
BREAD 4
BREAD 5
60 MINUTES
PROOFER DRY OUT
POWER
60 MINUTES
20 MINUTES
60 MINUTES
“Your Solutions Partner”
TOUCH SCREEN TO CONTINUE
OR INSERT USB DRIVE
Copyright © 2008 Duke Manfacturing