19
Set the number of sheets.
3
Number of Sheets
2
q Turn the jog dial to display “Number of Sheets” in
the display.
w Press the center of the jog dial to enter the selection mode, then turn it to select the desired number of sheets (1 to 25).
Select Number
2
To reset the number to “1”
Press the (Clear) button.
Select Number
6
e Press the center of the jog dial to confirm the number
of sheets.
Number of Sheets
6
To cancel the setting
Instead of going on to step e, press the button to
return to step q.
6. OPERATING
Press the button twice to return to the
“Ready” screen.
4
Booklet A4 6
Ready
After completing the above settings, bind one set first and check the binding condition.
Refer to “6-2. Using Connected to the DFC-10/12” and “6-3. Using in the Off-line (Manual
Feed) Mode”.
5
To Next Page
Loading...
