8.2 Oiling wicks and felts
When the machine is set up and after long periods of disuse the wicks and felt 1 in the
head must be soaked with a little oil.
–
Unscrew head cover 2.
–
Soak wicks and felt 1 with a little oil.
–
Replace and screw down the head cover 2.
The felt tab 3 of the head cover must be clamped between the absorption felt 6
and the nipple of the wick 5.
The foil 4 must be in contact with the inside of the head cover 2.
2 3
5
6
4
1
34
To Next Page
Loading...
