How to fix software version error on DURKOPP ADLER 867 Sewing Machine?
If you encounter a software version error on your DURKOPP ADLER Sewing Machine (DAC classic only), try updating the software. If the issue persists, consider replacing the control.
Why is speed limited due to insufficient mains voltage on DURKOPP ADLER 867 Sewing Machine?
If the speed is limited on your DURKOPP ADLER Sewing Machine due to insufficient mains voltage, check the mains voltage.
What to do if DA stepper card 1 encoder plug (Sub-D, 9-pin) is not connected on DURKOPP ADLER 867?
If the DA stepper card 1 encoder plug is not connected on your DURKOPP ADLER Sewing Machine, connect the encoder cable to the control using the correct connection.
General| Stitch Type | Lockstitch |
|---|---|
| Max Stitch Length | 12 mm |
| Needle System | 134-35 |
| Needle Thread Tension | Adjustable |
| Lubrication | Automatic |
| Type | Industrial Sewing Machine |
| Max Sewing Speed | 3000 stitches per minute |
| Presser Foot Lift | 20 mm |
| Power Requirements | 230V/50Hz |
To Next Page