EasyManua.ls Logo

dutch id SHADOW - 4.5. Charging the battery

Default Icon
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
69
EN
4.5. Chargingthebaery
6
WARNING
Heangofthechargerduringchargingmayleadtotheriskofre.Onlychargethebaeryinthe
e-bikewhileitisdryandinaplacewherethereisnoriskofre.Ifthisisnotpossible,removethe
baeryandchargeitinasuitableplace.
6
CAUTION
Ҍ Fullychargethebaerybeforerstuse.
Ҍ Onlychargethebaerywiththeoriginalcharger.Otherchargersmaydamagethebaeryor
adverselyaectthelifespanandpowerofthebaery.
Ҍ Onlyuseapowersupplythatmatchesthespecicaonsonthetypeplateofthecharger.
Ҍ Placethebaeryonaclean,drysurfaceifyouarechargingitwhileremovedfromthebike.
Ҍ Ensurethatnodirtand/ormoistureentersthebaeryconnector.
NOTICE
AsckerwithinformaoninEnglishwiththefollowingcontentisaachedtotheboomofthe
charger:ONLYusewithBOSCHLi-Ionbaeries!
Thee-bikeissuppliedwithaparallychargedbaeryandon-boardcomputerasstandard.Foran
opmumlifespan,werecommendfullychargingthebaeryandon-boardcomputerbeforeusing
thee-bikefortherstme.
4
You may charge the battery to any level. Charging a partially charged battery will not damage
it. You can also partially charge the battery if you wish to use the e-bike before the battery is
fully charged.
ThebaeryhasvebaerylevelLEDsv.EachconnuouslyilluminatedLEDrepresents20%
baerycapacity.TheadjacentashingLEDindicatesthatthebaeryissllbeingcharged.
Youcanchargethebaeryeitherdetachedfromoraachedtothee-bike:
4
The battery level LEDs are not visible if you charge the battery in the e-bike. In this case, you
can see the battery level on the on-board computer.
1. Insert the appliance plug of the power cable into the charger k.
Figure 13 - Inserng the appliance plug into the charger.
2. Insert the power plug of the power cable into a working power socket.
3. Openthebaeryholdercapc (only when charging in the e-bike).
4. Insert the charging plug of the charger kintothebaeryj(Figure14A)orbaeryholder
(Figure 14B).

Table of Contents