dutch id SHADOW - Turning the Lighting On;Off; Tyres (Correct Pressure and Required Pump)

81
EN
Presstheon/oswitchagaintoturnthee-bikeoagain.
4
Thee-bikewillautomaticallyturnofftosaveenergyafter10minutesofinactivity.
5.6. Turningthelighngon/o
Figure 27 - Keep the ‘+’ buon depressed to switch the bicycle lighng on or o.
Keepthe‘
’buondepressedtoswitchthebicyclelighngonoro.
4
Once you have turned on the lighting, this will be indicated in the status bar at the top of the
display of the on-board computer.
5.7. Tyres(correctpressureandrequiredpump)
6
CAUTION
Regularlycheckthatthetyresofthee-bikeareatthecorrectpressure.Insucienttyrepressures
leadtomorerapidtyrewear,reducedgripandhigherenergyconsumponofthee-bikesystem.
The ideal tyre pressure for the e-bike is 4 Bar.
4
You can also read the ideal tyre pressure on the side of the tyre.
The tyres have French valves. You can pump them up using a bicycle pump with a valve adapter.
Figure 28 - French valve.