30 31
RATE OF FIRE
Values 1 - 18 (Factory Default 12.5
bps)The ROF setting is used to set
the maximum rate of fi re. ROF is
adjustable by 1/10th per second.
Note: Always test your ROF over the
chronograph or rate of fi re measuring
device before entering the fi eld of
play. Chronographs are typically not
calibrated and results can vary from
device to device.
PERFORMANCE SETTINGS
BURST
ENTER
PERFOR
SETTING
FIRE
MODE
SEMI
NXL
FULL
OUT
LAW
FIRE MODE
(Factory Default Semi-Auto)
Choose 4 different fi re modes:
Semi-Auto:
One trigger pull = One shot
NXL:
NXL Ramp Compliant
Full:
Continuous fi re with trigger
depressed after 3rd trigger pull
Outlaw:
Set it up to your preference.
METHOD OS
DYEPAINTBALL.COM
MAX
HIGH
MED
LOW
MINI
MED
ENTER
PERFOR
SETTING
SMART
DWELL
DWELL
Dwell is the amount of time, in
milliseconds, that the solenoid is
activated for each shot. Setting the
dwell too high will decrease rate of
fi re, setting the Dwell to low will not
be suffi cient to ensure the marker
will cycle properly.
PERFORMANCE SETTINGS
OUTLAW
Customize pull per second, pulls
to start, burst of ramp. Select
Outlaw mode and follow prompts to
customize fi re mode.
METHOD OS
DYEPAINTBALL.COM
To Next Page
