Using the Tape Editor
34
The Date and Time dialog box appears.
3 Select the date and/or time format you wish to insert from the drop-down list and click OK.
The date and/or time appears on the label in the format you selected.
Adding Graphics
You can add a graphic to your label from the clipboard or from a file. If the graphic is in a file, the
format can be BMP, JPG, PCX, PNG, TIF, WMF, or EMF. When inserted on the label, the graphic
will be scaled automatically to the size of the surrounding text while maintaining the aspect ratio.
To add a graphic from the clipboard
1 Copy the graphic to the clipboard from another application.
2 Place the cursor at the point on the label where you want the graphic to appear.
3 Click or select Paste from the Edit menu.
The graphic appears on the label at the cursor position.
To add a graphic from a file
1 Place the cursor at the point on the label where you want the graphic to appear.
2 Click on the Standard toolbar or select Graphic from the Insert menu.
The Open File dialog box appears.
3 Select the graphic file you wish to insert and click Open.
The graphic you selected appears on the label.
To Next Page
Loading...
Need help?
General
