Dymo LabelWriter 400 Series - Esc> D Set Print Density Medium; Esc> E Set Print Density Normal; Esc> G Set Print Density Dark; Esc> y Set Print Resolution to 300 X300

<esc> d Set Print Density Medium
This command sets the strobe time of the printer to 87.5% of its standard duty cycle.
<esc> e Set Print Density Normal
This command sets the strobe time of the printer to 100% of its standard duty cycle.
<esc> g Set Print Density Dark
This command sets the strobe time of the printer to 112.5% of its standard duty cycle.
<esc> y Set print resolution to 300x300
This command sets the step resolution of the printer to match its print element resolution,
giving 300 x 300 dpi printing.
<esc> z Set print resolution to 203x300
This command changes the step resolution of the printer to 203 dpi giving a printing
resolution of 203 x 300 dpi.
Copyright © 2006, DYMO Corporation Page 19