CPA 2000
ELECTRO ACOUSTICS-Compact System Owner’s Manual
Features:
• Output capacity of 200 watts (IEC 268-3), the power amplifier is protected against floating (no load) and
short-circuit
• 5 integrated output circuits, controllable and switchable from the front user interface, function for obligatory
reception
• Direct digital recording and playback for voice message (optional), max. 1 min.
• 3 XLR-type inputs for MIC/LINE with sound shaping controls, electronically balanced, mutually switched phantom
power
• 3 switchable inputs for the connection of external line level equipment, with sound shaping controls
• Protective features
Ground fault surveillance (DIN/VDE 0800)
Pilot tone surveillance
Fault message output
Alert signals (DIN 33404), (optional)
Emergency power supply
• Other features:
Input with voice-operated switch for the connection of a telephone or the automated switching of incoming signals,
alternative
Gong-signals / Pre-Gong, alternative
Integrated relay-field to assign call and program materials to the 5 separate output circuits, or to be used as
direct outputs
• Priority function: mixable, block priority, cascade priority; alternative
• 1 input for the connection of a command microphone, controllable
•
output transformer for balanced, off-ground 100 V loudspeaker networks or alternative 70 V, 50 V
• Remote control of the main output signal, optional
•
Pre-configured for the connection of up to 3 microphone terminals MT 2005 or a PTT-microphone via a RJ 45
socket
• Connections for tape recorder and inserts (RCA)
• Monitor output
• LED indicators displaying the operational status of batteries, mains supply, general operation, ground fault
• LED-meters with a range from –13 dB to 0 dB plus clipping indicator
• Overall volume control, has to be bridged in the priority mode
• Power switch on the front panel
• Remote control connection
• 115/230 V mains supply, switchable on the rear of the CPA 2000
•
24 V battery power, gapless emergency power supply
• Optional 19" mounting kit
19