CPA 2000
High performance electro acoustics system in a compact sized desktop enclosure, rack mountable,
offering 3 Mic/Line and 3 line-level inputs, 200 watts output power capacity and 5 separately asssignable
output circuits. The CPA 2000 can be operated with 115/230V AC or 24V DC.
Specifications
Nominal output power 200 watts (IEC)
Nominal output voltage 100 / 70 / 50 volts
Nominal output impedance 100 V : 50 ohms // 220 nF
70 V : 25 ohms // 440 nF
50 V : 12.5 ohms // 880 nF
Sensitivity Mic/Line 0.6 mV / 12 mV
Maximum input voltage Mic/Line 470 mV / 8.5 volts
Sensitivity of the line-level inputs 430 mV
Distortion < 1 %
S/N ratio < –60 dBu
Monitor output 8 dBu / 600 ohms
Sound shaping controls 100 Hz : ± 12 dB
10000 Hz : ± 12 dB
Tape Rec output 775 mV / 47 k ohms, unbalanced
Operational voltage 115 V / 230 V AC at 50 - 60 Hz
nominal operation range of the mains supply ±10 %
power consumption without signal present [1] 20 W / 37 VA ±10 %
power consumption under standard measurement [2] 180 W / 220 VA ±10 %
power consumption under nominal condition [3] 464 W / 564 VA ±10 %
battery power supply 24 V DC
nominal operation range of the battery supply -10 % ..+30 % deviation from nominal value
power consumption without signal present [7] 0.48 A ±10 %
power consumption under standard measurement [8] 4 A ±10 %
power consumption under nominal condition [9] 10.5 A ±10 %
Environmental temperature 40° - 104° F (5 - 40° C)
Dimensions (W x H x D) 440 x 135 x 260 mm
Weight approx. 11 kg
Extension kits
• Alert, Gong, Pre-Gong NRS 90212 (121 655)
• Voice message NRS 90213 (121 656)
• Remote control of the main output signal NRS 90178 (121 406)
• Voice-operated switch NRS 90170 (121 414)
• Transformer balanced inputs NRS 90139 (121 170)
• 19" Rack mount kit NRS 90214 (121 660)
21
To Next Page
Loading...
Need help?
General
