Dynacord DSP 600 User Manual

DSP 600
35
the parameters Attack and Release are adjusted automatically. Select the type User for setting the parameters Attack
and Release manually. The value of the parameter Threshold depends on the used speakers and the input sensitivity /
gain of the used amplifiers.
TEMP Limiter
Additionally to the Peak-Limiter for the outputs there is a TEMP (Thermal Energy Management and Protection) limiter
available for each output. Parameters for the TEMP limiter are included in speaker settings files (.sps) and can be load-
ed to the device using IRIS-Net control software.

Dynacord DSP 600 Specifications

General

Brand	Dynacord
Model	DSP 600
Category	Computer Hardware
Language	English