Dynacord DSP 600 User Manual

DSP 600
41
6.5 Free Configuration - Full Edit 2 In 6 Out
In this configuration, all 6 outputs are configured for full range operation. OUT 1, OUT 2 and OUT 3 get their signal-feed
from IN A while OUT 4, OUT 5 and OUT 6 are fed from the input channel IN B. This configuration provides a “blank slate”
for creating any custom routing and processing application.
HINT: In this Configuration, no channels or parameters are linked.

Dynacord DSP 600 Specifications

General

Brand	Dynacord
Model	DSP 600
Category	Computer Hardware
Language	English