DYNACORD
42
6.6 3 Way Stereo-MonoSub+FR
This 3-way configuration provides stereo crossover for Lowfrequency and High-frequency devices and a summed mono
feed for subs as well as a Full-range output. IN A serves at the left input and IN B serves as the right input.
OUT 1 is a mono Sub-frequency channel, OUT 2 & 5 are L/R Low-frequency channels, OUT 3 & 6 are L/R High-frequency
channels and OUT 4 is the Full-range channel.
HINT: On Input channels, all Parametric EQ and Graphic EQ parameters are linked. For Output channels, linking
applies to Crossovers, EQ, Delay Level and Limiter.
To Next Page
Loading...