17
LP8500 ILP8500EN1
The display shows first the battery voltage and then the
other values, rolling. To browse, press the right
frequency-change button (11) on the transmitter (with
the receiver in operating mode).
The display also shows several error codes (Err_XX):
Error messages (codes) on the receiver display which
stops the diesel engine or prevent it from starting:
Err_01: Low engine oil pressure.
Measure: Check/top off oil.
Err_02: High hydraulic temperature.
Measure: Allow machine to cool. Check the drive
system/eccentric elements if the ambient temperature
is extremely high.
Err_03: Activated tilt switch.
Err_04: Can buss locking.
Error messages (codes) which does not stop the
engine:
Err_05: The generator does not charge.
Err_10: Radio contact broken during operation.
Measure: Change frequency if this occurs often.
OPERATION – RADIO REMOTE CONTROL UNIT
To Next Page
Loading...
