Dynaudio Sub 3 User Manual

12
To nd the suitable position for the Sub3
in your listening room, please read the
chapter “Positioning the subwoofer” on
page 20.
To unpack the subwoofer
1. Unpack the subwoofer on a clean,
even and soft area; oor carpeting is
very suitable.
2. The packaging should be opened
from the top. Remove all accessories
that come packed with the
subwoofer. Do not remove the top
part of the protective material.
3. With the protective material still in
place but with accessories removed,
carefully tilt the packaging on its side
and tilt again to turn it upside-down.
Ensure that no part of the top-cover
is obstructing the opening at the top.
4. The outer packaging can now be
lifted away from the subwoofer itself.
Remove the protective material that
now is on top. Through the bag you
can now see the underside of the
subwoofer.
5. Open the bag and remove such from
around the base of the subwoofer.
6. Again, carefully tilt the subwoofer
on its side and again to turn it onto
its feet. Note that the top part of the
protective material will now come off
easily so ensure that the subwoofer
does not drop or slide away in the
process.
Unpacking
o
ver
e
top
.
e
i
tsel
f
.
that
you
he
from
fe
r.
er
nto
f
the
m
e off
o
fer
h
e

Dynaudio Sub 3 Specifications

General

On/off switch	Yes
Product color	Black
AC input voltage	100 - 240 V
Power source type	AC
AC input frequency	50 - 60 Hz
Power consumption (standby)	0.5 W
Subwoofer type	Active subwoofer
Number of subwoofers	1
Subwoofer peak power	300 W
Subwoofer driver diameter	240 mm
Subwoofer frequency range	22 - 175 Hz
Subwoofer crossover frequencies	60 - 80 Hz
Line inputs (RCA)	3

Weight and Dimensions

Subwoofer depth	320 mm
Subwoofer width	266 mm
Subwoofer height	276 mm
Subwoofer weight	10500 g