Dynaudio Xeo 4 - Speaker Placement and Setup

17Xeo 4 / Xeo 6
Cloth cover
The cloth cover has been designed so it does not inuence the sound dispersion of the speaker. The
cloth cover is attached to the housing with magnets and may be removed if needed.
Setting up
CAUTION
Spikes with pointed ends
Xeo 6 oor-standing speakers are delivered with spikes for permanent installation on the
oor. The pointed ends of the spikes may result in injuries and damage delicate oors.
► Pay attention that you do not injure yourself with the spikes.
► We recommend inserting the spikes in aluminum feet if you have delicate oors, such as parquet
or laminate.
► Position the speaker in the desired location.
– Do not expose the speakers to direct sunlight, heat, or moisture.
– Do not place the speakers near devices with strong electromagnetic radiation or devices that
could be destroyed or damaged by magnetic elds.