13. USEFULL INFORMATION ON PRODUCT
13.1. Information on the Efficient Use of the Combi Boiler in Terms of Safety and
Energy Consumption
Isolation of your building is extremely important. Energy saving is achieved at a considerable degree
since the heat loss is lowest in houses with double-glazed windows and insulated walls.
• The use of thermostatic valves in your radiators ensures that the room temperature is constant or
allows you to save money.
• Turning radiator valves lower levels in the rooms which will not be used for a long time and
keeping the doors closed keeps fuel consumption low.
• If you use the program clock with your device, the combi boiler operates at the times you set and
consumes less fuel.
• Covering the radiator top and sides with furniture-like things negatively affects hot air circulation,
thus prevents the environment from overheating and increases fuel consumption.
• If you will leave your device in operation late at night, keeping water temperature of the heating
circuit at low levels will ensure saving.
• If you feel that the room temperature is high, the radiator valves should be closed instead of
opening windows.
13.2. Clogging in Installation
• In old installations with iron pipes, usually clogging occurs short time after the device is
commissioned.
• If clogging in installation is encountered with, then inhibitor (Sentinel X400, etc.) should be added
to installation water.
13.3. Cleaning of Boiler
Keep the outer casing of the combi boiler clean by wiping it with a soft damped cloth. Do not use strong,
abrasive cleaning agents.
Performing the maintenance once a year during the warranty period and periodically before the winter
season after the warranty expires ensures safe use, saves fuel and extends the useful life of the boiler.
Make sure periodic maintenance is strictly performed by E.C.A. Authorized Services. Use
original spares parts only to ensure maximum life span and safety of the device.
E.C.A. will not be responsible for damages to device or material or living beings nearby caused by
maintenance performed by unauthorized service or staff.
To Next Page