133
K000000000EJ 023826A0 100714
17.0 SPARE PARTS AND TECHNICAL
17.1 Spare parts
AAC BF01: Sensor junction block
AAC FA01: Particulate filter
AAC PB06: Li-Ion 7.2V 2.4Ah battery pack
AA RC05: Paper roll for printer, h=57mm Diam.=40mm
AAC ADX 005: Dummy sensor
AAC SE11: FLEX-Sensor O2, pre-calibrated and interchangeable
AAC SE12: FLEX-Sensor CO+H2, pre-calibrated and interchangeable
AAC SE10: FLEX-Sensor NO/NOx, pre-calibrated and interchangeable
AAC SE14: FLEX-Sensor NO2, pre-calibrated and interchangeable
AAC SE13: FLEX-Sensor SO2, pre-calibrated and interchangeable
AAC SE15: FLEX-
Sensor O2, pre-calibrated and interchangeable
AAC SE17: FLEX-Sensor CO 100,000 ppm, pre-calibrated and interchangeable
AAC SE18: FLEX-Sensor CO 20,000 ppm, pre-calibrated and interchangeable
AAC SE19: FLEX-Sensor sniffer, pre-calibrated and interchangeable
AAC SE20: FLEX-Sensor CO high immunity H2, pre-calibrated and interchangeable
AAC SE33: FLEX-Sensor CxHy related to CH4, pre-calibrated and interchangeable
AAC SE24: FLEX-Sensor CO+H2 low range, pre-calibrated and interchangeable
AAC SE25: FLEX-Sensor NO low range, pre-calibrated and interchangeable
AAC SE26: FLEX-Sensor NO2 low range, pre-calibrated and interchangeable
AAC SE28: FLEX-Sensor SO2 low range, pre-calibrated and interchangeable
AAC SE29: FLEX-Sensor CO2, pre-calibrated and interchangeable
17.2 Accessories
AA AL05: 100-240V~/12 VDC 2A feeder with 2 m cable
AA CA02: Power supply with car adapter
AA CR07: Rigid plastic case
AA ZN01: Back-pack
AAC CT01: Case with shoulder strap
AAC DP02: Deprimometer for Draft test
AAC KP01: Differential pressure kit
AA KT04: Tightness test kit
AA PM02: Manual pump kit for smoke measurement
AA SA08: 200 mm air temperature probe (cable length 2 mt)
AA SF61A: 7” (180 mm) gas probe, 2012°F (1100°C) extended temperature range, with 3 mt cable
AA SF51A: 7” (180 mm) gas probe, 2012°F (1100°C) extended temperature range, with 2 mt cable
AA SF62A: 12” (300 mm) gas probe, 2012°F (1100°C) extended temperature range, with 3 mt cable
AA SF52A: 12” (300 mm) gas probe, 2012°F (1100°C) extended temperature range, with 2 mt cable
40HT: 40” (1000 mm) gas probe, 2190°F (1200°C) extended temperature range, with 3 mt cable
60HT: 60” (1525 mm) gas probe, 2190°F (1200°C) extended temperature range, with 3 mt cable
AA SX01: Gas sampling probe for average CO, 300mm with 2 m cable
AA SX02: Probe for industrial motors, 400mm with 3 m cable
AA SL05A: 220 mm. flexible gas probe, 1100°C extended temperature range, with 2 mt cable
AA SP01: Protective screen for gas sampling probe
AAC EX02S: 10’ (3 m) extension cable for gas sampling probe
AA SM06: Rubber protecting cover
AAC SO01: Probe for measuring the ionisation current
AA SW08: Configuration software kit (USB + PC cable)
AAC TA03: Particulate/water filter assembly
AAC TA03A: Particulate/water filter assembly with steel pipe and connector
AA UA03: Adapter cable USB-A / mini USB-B
17.3 Service Center
E Instruments International LLC
402
Middletown Blvd, Suite 216
Langhorne, PA 19047 (USA)
Tel.: (215) 750-1212
Fax.: (215) 750-1399
E-mail: info@E-Inst.com
http://www.E-Inst.com
To Next Page
Loading...
Need help?
General
