To Next Page

To Previous Page

K000000000EJ 023826A0 100714

12.7 Readings→Tightness test

07/08/14

10:00

Tightness test

Existing

Result

New

KEY FUNCTION

Activate the context keys shown on the

display.

Returns to the previous screen.

CONTEXT KEY FUNCTION

Selects the available parameters.

Enters in the selected parameter setting.

Selects the available parameters.

◄

►

PARAMETER DESCRIPTION

With this menu it is possible to perform a tightness test, in accordance with UNI 7129, on new

systems or systems that have been restored after a repair.

SEE SECTION 12.8.

With this menu it is possible to perform a tightness test, in accordance with UNI 11137, on

existing systems.

SEE SECTION 12.9.

This menu allows the user to view and/or save the last test carried out.

SEE SECTION 12.10.

12.7.1 Connecting the tightness test kit to the instrument.

P+

New

Existing

Result

Default Chapter3
- Table of Contents3
Important Information7
- Introduction7
- Safety Warnings7
Safety8
- Intended Use of the Product8
- Improper Use of the Product8
Working Principle9
- Measuring Sensors9
Description of the Product10
- General Description of the Combustion Analyzer10
- General Characteristics of the Combustion Analyzer10
- Description of the Components of the Combustion Analyzer12
Main Configurations15
Technical Specifications16
- Measurement and Accuracy Ranges17
Startup18
- Preliminary Operations18
- Warnings18
- Power Supply of the Analyzer18
  - Checking and Replacing the Batteries18
  - Use with External Power Pack19
- Connection Diagram20
Power on - off23
- Starting the Device23
Configuration24
- Configuration Menu24
- Analysis Menu25
- Instrument Menu34
- Configuration=>Operator41
- Configuration=>Alarm43
- Information Menu44
- Configuration=>Diagnostic48
- Configuration=>Language58
- Configuration=>Restore59
Memory60
- Memory Menu60
- Memory=>Save62
- Memory=>Average64
- Memory Select65
  - Memory=>Memory Recall66
- Memory Data Logger69
- Memory=>Delete70
  - Memory=>Delete=>Single71
  - Memory=>Delete=>All72
- Memory=>Usage73
Print74
- Print Menu74
- Print=>Report75
- Print=>Configuration76
- Print=>Test77
- Print=>Header78
- Print=>Printer80
  - Print=>Printer=>Pairing81
- Print=>Measures List83
Measurements85
- Measurements Menu85
- Measurements Draft87
- Measurements Smoke88
- Measurements Ambient CO89
- Measurements Temperature90
- Measurements Pressure91
- Measurements=>Tightness Test92
  - Connection of the Tool Tightness Test Kit92
- Measurements=>Tightness Test=>New System93
  - Performing Tightness Test According to UNI 712995
- Measurements=>Tightness Test=>Existing System98
  - Configuration of Tightness Test According to UNI 11137102
  - Performing Tightness Test According to UNI 11137106
- Measurements=>Tightness Test=>Results of the Tightness Test108
Combustion Analysis110
- Startup and Auto-Calibration of the Device110
- Inserting the Probe in the Chimney110
- Combustion Analysis111
- End of Analysis111
- Combustion Analysis - Preliminary Operations112
- Combustion Analysis - Manual Mode114
- Combustion Analysis - UNI 10389 Mode116
- Combustion Analysis - Bimschv Mode117
- Combustion Analysis - Data Logger Mode118
Sensors119
- Sensors Arrangement119
- Sensor Types and Relevant Positioning119
- Gas Sensors Life120
- Table of Gas Sensor Life120
- Expandability to 4 Sensors121
- Cxhy Sensor for Measurement of the Unburned Hydrocarbons122
- Installing the Cxhy Sensor122
- CO Sensor for Carbon Dioxide Measurement in Combustion Processes123
- Installing the CO123
  - Sensor123
- Maintenance124
Troubleshooting131
- Troubleshooting Guide131
Spare Parts and Technical Assistance133
- Spare Parts133
- Accessories133
- Service Centers133
ANNEX a - Analysis Report Examples134
ANNEX B - Coefficients of the Fuels and Formulas137
ANNEX C - Declaration of Conformity139

Brand	E Instruments
Model	E4500-S
Category	Measuring Instruments
Language	English

E Instruments E4500-S User Manual

Table of Contents

Questions and Answers:

E Instruments E4500-S Specifications

Related product manuals