E-Mu proteus 2000 User Manual

Proteus 1000 Operation Manual 135
Programming Tutorial
Editing Presets
4. Move the cursor to the last field in the line. This is the Amount field.
The Amount field determines the amount of modulation applied. Set
this value to “+100.”
This setup connects the Filter Envelope Generator to the Filter Cutoff as
shown in the following diagram.
5. Now, return to the Filter Envelope Mode screen. Set the Mode to “time-
based.”
6. Advance to the Filter Envelope parameter page.
7. Move the cursor underneath the time field and change the value to
about +50. Now when you press a key the filter slowly sweeps up.
L1
PATCHCORD #01
F
iltEnv+ -> FiltFreq +100
R
L
Pan
Instrument
Tone
Filter
DCA
Filter Env.
Fc Q
L1
FILTER ENVELOPE
M
ode: time-based
L1
FILT ENV RATE LEVEL
Attack1 50 1
00%

E-Mu proteus 2000 Specifications

General

Brand	E-Mu
Model	proteus 2000
Category	Synthesizer
Language	English