Proteus 1000 Operation Manual 43
Master Menu
MIDI Parameters
MIDI
Parameters
MIDI parameters control how the Proteus 1000 sends and receives MIDI
data.
MIDI Mode MIDI Mode selects one of the three MIDI modes: Omni, Poly or Multi
mode.
The MIDI Mode Change parameter specifies whether mode changes made
through an external MIDI controller are accepted or ignored.
The MIDI modes are as follows:
Omni
Responds to note information on all MIDI channels and plays the preset
currently displayed in the main screen.
Poly
Responds only to note information received on the currently selected MIDI
channel (on the preset selection screen) and plays that channel’s associated
preset.
Multi
Responds to data on any combination of MIDI channels and plays the
specific preset associated with each of the MIDI channels. You must select
multi mode for multitimbral operation.
MIDI SysEx ID This page defines the MIDI system exclusive (SysEx) device ID number. The
SysEx ID lets an external programming unit to distinguish between
multiple Proteus 1000 units connected to the same preset editor. In this
case each unit must have a unique SysEx ID number.
__
__
WARNING: When
transferring SysEx data from one
Proteus 1000 to another, the ID
numbers of both units must be
the same.
MIDI MODE CHANGE
omni ignored
MIDI SYSEX ID
000
To Next Page
Loading...
Need help?
General
