E-Mu proteus 2000 User Manual

18 E-MU Systems
Setup
Instant Gratification

To Audition a Preset
1. Select a preset by turning the data entry control while the cursor is
anywhere on the lower line. The preset number field (shown above) is
the normal position of the cursor and pressing the Enter button will
return the cursor to this position.
2. Press the Audition button on the front panel. The Audition LED will
illuminate and a short riff will play the selected preset.
3. Continue to select and audition presets.
4. Press the Audition button again to turn Audition mode off. The LED
will extinguish.
Selecting and Quick
Editing Presets
The first thing you’ll do with the Proteus 1000 is select and play the factory
provided presets. Proteus 1000 comes standard with 12 banks containing
128 presets each.
The first four banks are USER locations that can be overwritten and used to
store your own presets. The presets that come stored in the USER presets are
duplicated in banks 4-7 of the “CMPSR” ROM bank, so feel free to overwrite
them with your own presets. You won’t be losing anything.
The ROM Card identifier is shown in the top right of the display. The preset
is identified in the bottom line of the main screen (the screen that appears
when you first power up the unit).
BankSel 0:00 32:2 User
0
58
2
syn: Big Planet
C01 Vol127 Pan01
R
User
0
00
0
bas: Interference
Preset
Number
Channel
Number
Initial
Volume
Setting
Initial
Pan
Setting
Preset
Location
Preset
Category
Bank
Number
Preset
Name

E-Mu proteus 2000 Specifications

General

Brand	E-Mu
Model	proteus 2000
Category	Synthesizer
Language	English