Proteus 1000 Operation Manual 147
Effects
Master Effects
5. Set the other effect parameters to your preference. Refer to the infor-
mation in the last section for detailed descriptions of these parameters.
6. Use the Data Entry Control to select the FXB Algorithm screen.
7. Select an Effect.
8. Use the Data Entry Control to select the FXB parameter screen.
9. Set the other effect parameters to your preference. Refer to the infor-
mation in the last section for detailed descriptions of these parameters.
10. Press the Edit menu button. The LED illuminates and the Edit menu
displays the last screen used.
11. Use the Data Entry Control to access the FXA Algorithm page and select
“Master Effect A.”
__
__
The MIDI mode (Master
Menu) must be set to Omni or
Poly mode in order to select the
effects in the preset.
12. Repeat step 11 for the FXB Algorithm
13. Save the preset. The Master effects routing will be saved along with the
preset.
FXB ALGORITHM
Distorted Flange
FXB FEEDBK LFORATE DELAY
127 127 145ms
FXA ALGORITHM
Master Effect A
To Next Page
Loading...
Need help?
General
