SHANGHAI ESURVEY GNSS CO., LTD.
25
6.3 Set the Level Line
The red level line can be used as the level line.
To set the level line, do the following:
1. Level up the instrument and power on the instrument.
2. To turn on the laser, press V/% for three seconds. The red level line is the level line.
7 Configuration Menu
With the configuration menu, you can achieve the following:
Switch on/off the tilt compensator of the vertical angle
Define the zenith
Set automatic power-off
Set the minimum angle reading
Set the baud rate
Set the recording medium
Set the beep
Set the angle unit
Set the date and time
To Next Page
Loading...
