SHANGHAI ESURVEY GNSS CO., LTD.
29
7.3 Set Automatic Power-off
Automatic power-off is to prevent unnecessary power consumption. With it activated, the
instrument will automatically power off after 30 minutes if no action is carried out.
To set automatic power-off, do the following:
1. Press → R/L to enter configuration mode:
2. Press 0SET to turn to the following page:
3. Do one of the following:
o To turn on automatic power-off function, press R/L to change the value to ON.
shows in the upper right on the display.
o To turn off automatic power-off function, press R/L to change the value to OFF.
4. Press to confirm selection.
To Next Page
Loading...