e-survey ET2A - Set the Minimum Angle Reading; Check and Adjust the Vertical Line of the Reticle

SHANGHAI ESURVEY GNSS CO., LTD.
30
7.4 Set the Minimum Angle Reading
You can select the displayed angle format in three steps (1", 5" or 10"):
Step
Degree sexagesimal
Gon
1"
0° 00' 01"
0.00.03 gon
5"
0° 00' 05"
0.00.15 gon
10"
0° 00' 10"
0.00.30 gon
To set the minimum angle reading, do the following:
1. Press → R/L to enter configuration mode:
2. Press 0SET to turn to the following page:
3. Press R/L to select one of the following:
o 1"
o 5"
o 10"
4. Press to confirm selection.