E.T. Systems Drive 600 - BT Button Triggers - Standard Mode

8
Basic operang
features
“BT” Buon triggers.
Standard mode.
The BT funcons are the primary full gate opening funcons for motor vehicle access.
There are two ways of acvang the “BT” funcons on this control card. Either via the hardwired BT input or the BT receiver channel.
In Standard mode the gates respond to each BT trigger.
In Standard mode you have access to the following advanced features: - Holiday lock-out and Party mode.
Acon Response
Momentary BT trigger.
Gate begins
opening.
No buzzer tones.
At full open posion. Gate stops. No buzzer tones.
Momentary BT trigger.
Gate begins
closing.
No buzzer tones.
Momentary BT trigger.
Gate stops and
immediately
starts opening
again.
No buzzer tones.
Momentary BT trigger. Gate stops. No buzzer tones.
Momentary BT trigger.
Gate begins
closing.
No buzzer tones.
At full closed posion. Gate stops. No buzzer tones.
STOP
Gate closed.