E-XTEQ DS One - Battery Selection via BK Code and VIN Entry

24/40
E-XTEQ DS ONE User Manual / Ref. MAN_DSOne_STL_EN_V1.3
Diagnostic PDI 2/9
BATTERY SELECTION ////////
To manually enter the BK code(s), click
on
. Start with the rst one and if
necessary, move down to the second
one to edit it as well.
When the BK code has been
entered, click on
to validate.
It will be necessary to ll in the VIN
either by scanning it or manually, then
validate it.
If the VIN is found in the database,
the characteristics of the battery will
be displayed. click on
to validate.
In the case of a QR code scan with two
BK codes, these will be lled in.
Click on
to validate.
It will be necessary as well to specify
which of the two batteries is to be tested.
Select
for the main battery or
for the auxiliary battery.
The VIN of the vehicle will be
displayed. Click on
to validate.
If the VIN is found in the database,
the characteristics of the battery will
be displayed. Select
to validate.
Some vehicles share a BK code and/or a VIN
structure, if so a “Select car” menu will be
opened. Select the right car and press this
button
to validate.
Table of Contents
Introduction
Safety Guidelines
Maintenance and Storage
Before Use
Usage Precautions
Disassembly/Damage/Removal
Cleaning the Product
Information internal battery
Getting Started
Safety Reminders
Appearance and Dimensions
Presentation
Job Storage
Accessories
Best Practices
Positioning of the clamps
Connector longevity
Hybrid vehicles
Initial Setup
Power Cable Connection and Power On
Battery Cable Clamps Connection
Optimus
- Optimus installation
- Using Optimus
Update
Garage code (RRDI)
Settings
Preferences
WI-FI Connection
Other settings
Diagnostic PDI and REPAIR
Battery selection
- Using BK code
- Using VIN
Start Diagnostic
Other diagnostics
Results
Results storage
Support Information
Warranty
Technical specications