E-XTEQ DS One - Updating the DS One Software via OPTIMUS

17/40
E-XTEQ DS ONE User Manual / Ref. MAN_DSOne_STL_EN_V1.3
Initial Setup 7/9
UPDATE ////////
Optimus software
DS One is delivered with a Software Installation Guide (OPTIMUS).
Optimus connection is mandatory for product updates and is useful for data (history)
storage.
To install OPTIMUS on your PC, you can follow the instructions on the Software
Installation Guide or the detailed instructions in the “Optimus installation” section of
this manual.
Your recently delivered device may need an initial update.
Tool Update
To update the tool, please connect to Optimus.
When connecting the DS One to Optimus a new software update will be proposed if
available.
The following screen will then appear on the DS One screen.
On OPTIMUS software:
The device will
appear on your
dashboard. You can
update by clicking on
“Update Device”.
Click on the image of
the product to view
the dashboard.
Table of Contents
Introduction
Safety Guidelines
Maintenance and Storage
Before Use
Usage Precautions
Disassembly/Damage/Removal
Cleaning the Product
Information internal battery
Getting Started
Safety Reminders
Appearance and Dimensions
Presentation
Job Storage
Accessories
Best Practices
Positioning of the clamps
Connector longevity
Hybrid vehicles
Initial Setup
Power Cable Connection and Power On
Battery Cable Clamps Connection
Optimus
- Optimus installation
- Using Optimus
Update
Garage code (RRDI)
Settings
Preferences
WI-FI Connection
Other settings
Diagnostic PDI and REPAIR
Battery selection
- Using BK code
- Using VIN
Start Diagnostic
Other diagnostics
Results
Results storage
Support Information
Warranty
Technical specications