Eaglemaster E8 - Fix time engine start; Temperature engine start; To active Fix time engine start the vehicle

- Fix time engine start : Press the button once.
This feature will automatically engine start for every (2/3/4/24 hour) check programme
Table-3 of NO.2. This makes it possible to warm up the engine (Table-3 of NO.1 ), as well
as the system is in Safe status.
To active Fix time engine start the vehicle:
1. Armed position, press the button once.
2. The 2-way LCD will indicate fix time icon and hour icon as under:
- Temperature engine start : Press the button for over 2sec.
This feature will automatically engine start when the programme temperature detect ( -5C,
-10C,-20C,-25C) check programme Table-3 of NO.3. This makes it possible to warm up the
engine (Table-3 of NO.1 ), as well as the system is in Safe status.
To active Fix time engine start the vehicle:
1. Armed position, press the button for over 2sec.
2. The 2-way LCD will indicate ( ) icon and temperature icon as under:
3. The main unit will detect the vehicle temperature after 10sec.
Exit the FIX time engine start mode:
1. Under the mode, press the button once again.
2. The 2-way LCD will turn off fix time icon and give 2 beep sound.
Exit the FIX time engine start mode:
1. Under the mode, press the button for over 2sec. again.
2. The 2-way LCD will turn off temp. icon and give 2 beep sound.
2-way LCD display :
2-way LCD display :
Run time icon will on for 2sec.
To indicate fix time every ( , , , ) hour.
Programme temp. icon will on for 2sec. to indicate
detect temp. As:
( , , , )
Turn on to indicate
Fix time start enable
Turn on to indicate
temp.start enable