Remote Function Table:
Functions Step Condition
Trunk open / CH-1 active
Prolong engine running time
Enable check-in range
Status check & Back light
Indoor temperature check
Silent armed
Valet mode
Panic mode
Anti-Hi-Jack mode
FIX time engine start
Temperature engine start
CH-2 active
CH-3 active
CH-4 active
Press over 2sec. until 1 beep given
Press once, after LCD indicate 3min left.
Press once within 5sec. of arming.
Press once
Press over 2sec. Until 1 beep given.
Press over 2sec. Until 1 beep given.
Press over 2sec. until 1 beep given.
Press over 2sec. until 1 beep given.
Press over 2sec. until 1 beep given.
Press once
Press over 2sec. until 1 beep given.
Press over 2sec. until 1 beep given.
Press over 2sec. until 1 beep given.
Press over 2sec. until 1 beep given.
Engine running mode
Armed with safe status
Arming within 5sec.
ACC OFF
ACC ON
ACC OFF
ACC ON
Armed with safe status
To Next Page
Loading...
