Easy Electronics xLogic Micro PLC - Simulation Tool and Status Window

227
6.8.4SimulationToolandstatuswindow
Atoolboxpopsupwhenyouopenthesimulationmode.Itcontains:
• Icons(e.g.switches)foroperatorcontroloftheinputs .
• Aniconforthesimulationofapowerfailure,fortestingtheswitchingresponsewithreference
toretentivitycharacteristicsafterpowerfailure.
• Icons(e.g.bulbs)formonitoringoutputs .
• Simulationcontroliconsand
• Timecontrolicons.
Simulationcontrolicons
Startsimulation
Stopsimulation
Holdsimulation(pause)
Timecontrol
Ifyouhaveprogrammedatime-sensitivecircuit,youshouldusethetimecontroltomonitorthereaction
ofyourcircuitprogram.
Startsimulationforaspecifictimeornumberofcycles.
Settheperiodandthenumberofcyclesusingthefollowing
icons.
Settingtheperiodandthetimebaseforatimelimited
simulationorsettingaspecificnumberofcycles
DisplayofthecurrenttimeinxLogicsoft
ModificationofthecurrenttimeinxLogicsoft