Easy Electronics xLogic Micro PLC - Assigning a Circuit Program Name

To Next Page

To Previous Page

5.5.4Assigningacircuitprogramname

Youcanassignyourcircuitprogramanamethatconsistsofupto16uppercase/lowercaseletters,

numbersandspecialcharacters.

Intheprogrammingmenu:

1.Movethe">"cursorto 'Edit..':Press or

2.Accept'Edit':PressOK

3.Movethe">"cursorto'EditName':Press or .

4.Accept'EditName':PressOK

Press and tolistthealphabet,numbersandspecialcharacters,eitherinascendingor

descendingorder.Youcanselectanyletter,numberorcharacter.

Toenteraspacecharacter,simplymovethecursorwith tothenextposition.Thischaracteristhe

firstoneinthelist.

Examples:

Pressoncetoselectan"A"

fourtimestoselect"}",etc.

Thefollowingcharactersetisavailable:

Letusassumeyouwanttonameyourcircuitprogram"ABC":

1.Select"A":Press

2.Movetothenextletter:Press

3.Select"B":Press

4.Movetothenextletter:Press

5.Select"C":Press

6.Confirmthecompletename:PressOK

Yourcircuitprogramisnownamed"ABC",andyouarereturnedtotheprogrammingmenu.

Tochangethenameofyourcircuitprogram,proceedinthesameway.