Easy Electronics xLogic Micro PLC - Set Password

52
4.3.3Setpassword
xLogicsupplypasswordprotectionfunctionforyourprogram.Youcanchooseaccordingtoyourneed.
Seethefollowinginstruction;you’llunderstandthemethodofsettingpassword.
Setonepassword
Apasswordcontainslessthanorequalto4charactersandeachcharacterisArabiannumberfrom0to
9.Itiseasytospecify,editorremovethepassworddirectlyonthexLogicinthe “Password” menuofthe
functionpage:
YoushouldfirstselecttheFUNCTIONPAGE.(Read5.2)
1.Movethecursorto “Password”:Press or key.
2.Confirm “Password”:PressOKkey.
Example:letusset “1234” aspasswordforaprogram.NowtheLCDdisplaysthefollowinginterface:
Select “New” option,andtheneditit.
3.Select “1”:press keyonce.
4.Movethecursortothenextcharacter:press key.
5.Select “2”:press keytwice.
6.Movethecursortothenextcharacter:press key.
7.Select”3”:press keythreetimes.
8.Movethecursortothenextcharacter:press key.
9.Select “4”:press keyfourtimes.
Nowdisplay: