Easy Electronics xLogic Micro PLC - Assigning System Cover

77
5.5.5Assigningsystemcover
Defaultdisplay:
Themessageinfirstandthesecondlinecanbemodified/editintheprogrammingmode(alsocanbe
modifiedinxLogic),eachlinecontains10characters(eachlinecontains16charactersforELC-22/26
seriesCPU).
Intheprogrammingmenu:
1.Movethe">"cursorto 'Edit..':Press or
2.Accept'Edit':PressOK
3.Movethe">"cursorto'EditCHMI':Press or .
4.Accept'EditCHMI':PressOK
Press and tolistthealphabet,numbersandspecialcharacters,eitherinascendingor
descendingorder.Youcanselectanyletter,numberorcharacter.
Toenteraspacecharacter,simplymovethecursorwith tothenextposition.Thischaracteristhe
firstoneinthelist.
Letusassumeyouwanttoeditthesystemcover"ABC":
1.Select"A":Press
2.Movetothenextletter:Press
3.Select"B":Press
4.Movetothenextletter:Press
5.Select"C":Press
6.Confirm:PressOK