Easy Electronics xLogic Micro PLC - Set Parameter

49
4.3.2Setparameter
Ifyouwanttoselectaparameter,youneeddoasthefollowingprocedures:
1. UndertheFUNCTIONPAGE,select
“Setparameter”:Press or key
2.Confirmbypressing OK key.
ThenxLogicdisplaysthefirstparameter,soyoucanmodifyasyoulike.Ifthereisnoparameterto
set/modify,youcanpressESCkeytoreturn.
3.Selectparameteryouintendtomodify.
4.Selectcertainspecificvalueofthatparameterwhichyouwanttoedit,thenpressOKkey.
Howtomodifyparameter?
A.Firstselectcertainparameterwhichyouneedtoeditbyfollowingthebelowprocedures:
1.UndertheFUNCTIONPAGE,select
“Setparameter”:Press or key