Easy Electronics xLogic Micro PLC - Factory Door; Standard Solution

255
7.4Factorydoor
Requirementsforagatecontrolsystem
Inmanycasesafactoryentranceisclosedwithrollgates.Thosegatesareonlyopenedwhenvehicles
needtoenterorleavethefactorygrounds.Thegateiscontrolledbytheporter.
l Theslidinggateisopenedandclosedbymeansofapushbuttoncontrolinthegatehouse.Theporter
canmonitorthegateoperation.
l Therollgateisnormallyfullyopenedoritisclosed.However,gatemovementscanalwaysbe
interrupted.
l Aflashinglightisactivatedfivesecondsbeforethegatemoves,andwhilethegateisinmotion.
l Asafetypressurestripensuresthatpeoplearenotinjuredandthatnoobjectsaretrappedand
damagedwhenthegateisclosing.
7.4.1Standardsolution
Therearemanydifferentcontrolsystemsforoperatingautomaticgates.TheOPENandCLOSEbuttons
initiategatemovementsintotherelevantdirection,provideditisnotalreadymovingintheopposite
direction.MovementofthegateisterminatedeitherbymeansoftheSTOPbuttonortherelevantlimit
switch.