236
Fig.7.10.6 Startsimulation
2.Clickinputblockwithmouse.Itcanchangethestateofinput,statedisplays “ON” and “OFF” inthe
outputpointofthemodule,soyoucanobservethestateofinputoroutput.
3.Click buttonagain,toterminatetheoperationfunctionofthemodule.
Fig.7.10.7SimulationOperation
Attn: Inabovegraph,youcansee “ON” or “OFF” stateofinputandoutput,andtheoutputstateandthe
currentstateoftimingandcountingofallblocks.Throughthissimulationoperationgraph,youcanexam
To Next Page