Easy Electronics xLogic Micro PLC - Page 37

37
2.Requirementfortheelectronictransistoroutput:
TheloadconnectedtoxLogicmusthavethefollowingcharacteristics:
* Themaximumswitchcurrentcannotexceed0.3A.
* WhentheswitchisON(Q=1),themaximumcurrentis0.3A.
Notes(PNP):
*Theloadconnectingvoltagemustbe ≤60VDCanditmustbeDC.
*The “+” terminaloftheoutputwiringmustbeconnectedwiththeDCpositive
voltage,anditmustbeconnectedwiththe “L+” terminalofthexLogicpower ，a
loadmustbeconnectedwiththe “-” terminaloftheDCnegativevoltage.