82
Showing/hidingparameters-theparameterprotectionmode
Ifyouwanttoshow/hidetheparameterandallow/preventitsmodificationinparameter
assignmentmode:
1.Movethecursortotheprotectionmode:Press or
2.Selecttheprotectionmode:Press or
Thedisplayshouldnowshow:
3.Confirmyourentrieswith:OK
Enabling/disablingretentivity
Todecidewhetheryouwanttoretainyourcurrentdataafterapowerfailureornot:
1.Movethecursortotheretentivitysetting:Press or
2.Selecttheretentivitysetting:Press or
Thedisplaynowshows:
3.ConfirmyourentrieswithOK
Note
Forfurtherinformationontheprotectionmode,refertothetopic"Parameterprotection".
Forfurtherinformationonretentivity,refertothetopic"Retentivity".
Youcanmodifytheprotectionmodeandretentivitysettingonlyinprogrammingmode.
To Next Page
Loading...