EasyIO FW Series - Analog Output Connection

To Next Page

To Previous Page

EasyIO FW Series – User Reference v3.0

Analog Output Connection

EasyIO FW series has Analog Output connections. Each Analog Output can only drive voltage.

The operating range for voltage mode is 0 – 10V.

**We DO NOT recommend you to drive a relay directly from UO 0-10V mode as it is not design for it

and will damaged the UO. **

Universal Output

4 Channels

Type

Voltage: 0 – 10VDC , Min Impedance 2,000 Ohm.

Other manuals for EasyIO FW Series