63
Inertia Brake
Note: Use only Eaton lubricant part number 5564527 (Nye Lubricants NYOGEL 760G) - For MSDS safety sheet or other informa-
tion see www.nyelubricants.com
4. Make sure all connectors (2 on the right side, 2 on the left side) are fully mated and latches are locked.
5. Tie down jumper harness with ty-raps as shown below.
Note: Do no
t over tighten ty-raps.
T
-ra
s
T
-ra
s
Fill Transmission and Road Test
1. Fill transmission with synthetic transmission oil per Eaton publication TCMT-0021 “Lubrication Manual.”
2. Look for leaks.
3. Road test vehicle.
To Next Page
Loading...
Need help?
General
