SC9000 EP medium voltage drives
SC9000 EP medium voltage drives IB020001EN—February 2016 www.eaton.com i
Disclaimer of warranties and limitation of liability
The information, recommendations, descriptions and safety notations in this document are
based on Eaton’s experience and judgment and may not cover all contingencies. If further
information is required, an Eaton sales office should be co
nsulte
d.
Sale
of the product shown
in this literature is subject to the terms and conditions outlined in appropriate Eaton selling
policies or other contractual agreement between Eaton and
the
purchaser.
THERE ARE
NO
UNDERSTANDINGS, AGREEMENTS, WARRANTIES, EXPRESSED
OR
IMPLIED,
INCLUDING WARRANTIES
OF
FITNESS FOR
A
PARTICULAR PURPOSE
OR
MERCHANTABILITY, OTHER
THAN
THOSE SPECIFICALLY SET
OUT IN ANY EXISTING
CONTRACT BETWEEN THE PARTIES.
ANY
SUCH CONTRACT STATES THE
ENTIRE
OBLIGATION
OF
EATON. THE CONTENTS
OF
THIS
DOCUMENT SHALL NOT BECOME
PART
OF OR MODIFY ANY
CONTRACT BETWEEN THE
PARTIES.
In no event will Eaton be responsible to the purchaser or user in contract, in tort (including
negligence), strict liability or otherwise for any special, indirect, incidental or consequential
damage or loss whatsoever, including but not limited to damage or loss of use of equi
pmen
t,
plant or power system, cost of capital, loss of power, additional expenses in the use
of
existing power facilities, or claims against the purchaser or user by its customers resu
lting
from the use of the information, recommendations and descriptions contained herein. The
information contained in this manual is subject to change without no
tice.
Cover photo: SC9000 EP medium voltage drives
To Next Page
Loading...
