Appendix D: Optional equipment
78 SC9000 EP medium voltage drives IB020001EN—February 2016 www.eaton.com
Representative photos
Figure 83 shows a high voltage input incoming
compartment. Figure 84 shows a detail of the incoming
cable termination points.
Figure 83. High voltage incoming compartment
Figure 84. Incoming cable terminations
O&M technical references
For additional information about the high voltage Input
system elements, refer to your project O&M manual
references:
IB 48050 Instructions for Installation, Operation,
and Maintenance of the AMPGARD 15 kV,
300 A Vacuum Starter
IB 48051 Instructions for Installation, Operation,
and Maintenance of the SL 15 kV,
300 A Vacuum Contactor
To Next Page
Loading...
