Eaton SC9000 EP - SC9000 EP dV;dt Filters and Ratings; Physical Location in SC9000 EP Drive; Filter Cabinet Outline

Appendix D: Optional equipment
64 SC9000 EP medium voltage drives IB020001EN—February 2016 www.eaton.com
SC9000 EP dV/dt filters and ratings
SC9000 EP dV/dt Filter designs are based upon drive rated
voltage and current. Eaton application engineers select a
filter during the project design process. Tables 13 and 14
show SC9000 EP dV/dt filter models.
Table 13. 2300 V dV/dt filters
Table 14. 4160 V dV/dt filters
dV/dt filter as part of the SC9000 EP lineup
During the project application and design process, the
intended cable lengths and motor type selected will
determine whether to apply a dV/dt filter. If your project
needs a dV/dt filter, Eaton application engineers will select
a filter for the intended drive, motor and installation.
Physical location in SC9000 EP drive
The SC9000 EP dV/dt filter, when present, is typically located
in the SC9000 EP panel lineup, adjacent to and downstream
of the inverter cabinet. However, it can be located remotely
depending on the application and installation constraints.
Filter cabinet outline
Figure 58 shows a typical cabinet outline for a dV/dt filter.
Figure 58. dV/dt representative cabinet outlines
Catalog
number
39C2078
Drive
power
(hp)
Filter
rating
(A)
Cabinet
size
(H x W x D)
Watts
loss
(W)
G43 300 71 92 x 24 x 50 1024
G44 400 93 92 x 24 x 50 1084
G45 500 116 92 x 24 x 50 1102
G46 600 136 92 x 36 x 50 1383
G48 800 180 92 x 36 x 50 1440
G410 1000 225 92 x 36 x 50 1514
G412 1250 279 92 x 36 x 50 1658
G415 1500 335 92 x 36 x 50 1802
G420 2000 446 92 x 36 x 50 2129
G425 2500 558 92 x 36 x 50 2226
Catalog
number
39C2028
Drive
power
(hp)
Filter
rating
(A)
Cabinet
size
(H x W x D)
Watts
loss
(W)
G43 300 44.7 92 x 24 x 50 1282
G44 400 57.0 92 x 24 x 50 1360
G45 500 65.1 92 x 24 x 50 1357
G46 600 81.5 92 x 36 x 50 1674
G48 800 101 92 x 36 x 50 2029
G410 1000 125 92 x 36 x 50 2011
G412 1250 159 92 x 36 x 50 2163
G415 1500 186 92 x 36 x 50 3348
G420 2000 248 92 x 36 x 50 3444
G425 2500 310 92 x 36 x 50 3592
G430 3000 373 92 x 40 x 50 4843
G435 3500 434 92 x 40 x 50 4632
G442 4250 527 92 x 40 x 50 6731
G450 5000 633 92 x 40 x 50 7892
G460 6000 760 92 x 40 x 50 8033