Eaton Scantronic i-on10 - Reset Codes Pins; Date and Time; Set Time & Date; Updates

System Options Menu
Page 59
Reset Codes Pins
This option allows you to enable or disable the Reset Codes link on the i-on10 PCB. If you
disable Reset Codes Pins, the Reset Codes link cannot be used to reset the installer and
master user codes.
Warning: The control unit will need to be replaced if you disable Reset Codes Pins
and then forget the installer code!
Date and Time
Set Time & Date
This option lets you set the control unit’s internal clock to the correct time and date. You
will have to re-program the date and time if the control unit loses power for an extended
time and the battery is exhausted.
Note: The internal clock adjusts itself for daylight saving in Spring and Autumn.
Updates
Language
This option allows you to select the language used for the menus and options.