Eaton Scantronic i-on10 - About Menu; Panel, Bus, and Keypad Information

Page 65
Chapter 11: About Menu
The About menu offers information about the control unit and keypads.
Panel
This option shows:
 The control unit model (i-on10).
 The control unit's name, if defined in System Options, Hardware, Panel Name (page
57).
 The control unit’s software (firmware) version number.
Press  or  to see each item of information.
Bus
This shows the total number of devices on the bus. Since the bus can have only keypads,
this is the same as the number of keypads.
Keypads
If you select a keypad by scrolling up or down the list and then press , the display shows
the version of firmware running on the keypad.
If you find that the Keypad option does not display an individual keypad’s software version,
you can check the keypad by pressing the “A” and “” keys at the same time.