XS series operating manual
XS user manual v0.55 - 76 -
Move the reverse video line in front of the TIME line with the UP/DOWN arrows keys.
Press on the RIGHT arrow or ENTER key.
The display shows :
Fig 9.7
With the UP/DOWN arrow keys scroll the various available timer modes (AUTO, MANUAL).
Enter the selected mode with the ENTER key.
In the AUTO mode, it is possible to set the RISE, HOLD and FALL times from 0 up to 999 seconds.
Move the reverse video line in front of the HOLD line.
Press on the RIGHT arrow or ENTER key.
The display shows :
Fig 9.8
Select the number to be modified by moving the cursor with the RIGHT/LEFT arrow keys.
Increase or decrease the value with respectively the UP and the DOWN arrow. Repeat
operation for all the numbers if necessary.
Enter the time with the ENTER key
Proceed the same way for the RISE and FALL times.
To Next Page
Loading...