XS series operating manual
XS user manual v0.55 - 82 -
To modify the memory number from the measurement screen ,press on the [MEM:x] key.
Display shows :
Fig 10.4
With the up and down arrow keys, increase or decrease the memory number (from 0 to 9). The
parameters recall line resumes the content of each memory.
Enter the selected memory either by pressing again on the [MEM:x] function key or by pressing the
enter key.
WARNING
ANY PARAMETER MODIFICATION IS AUTOMATICALLY STORED IN THE MEMORY
Function selection
From the initialization menu, press on the [PARAM] key.
Display shows :
Fig 10.5
Select the test to be modified and enter it with the enter key. Display shows :
Fig 10.6
To Next Page
Loading...